*NEW* Trike Expansion Ramp



The Newest Loading Ramp offered by InnerBox Loading Systems: The LoadAll Expansion Ramp - built and designed to load motorcycles, ATVs, Snowmobiles, Side-X-Sides, and most importantly: TRIKES.

The Expansion technology developed by LoadAll starts with a socket style support arm that connects to the main ramp frame via its Side-rail. This arm acts as both a support and the sliding structure the smaller "Wing" ramps use to pull in and out - allowing the ramp to expand in width from 43" to 50" to occupy wide loads such as Trikes and Side-X-Sides.

This new loading ramp gives you the most versatile loading system on the market and will outfit your truck in the best way possible to bring any and all of your gear and equipment with you at a moments notice. You will also have the security of knowing that since its a LoadAll the system will never rely on your tailgate for loading, unloading or transportation; you will have the ability to load the heaviest and largest of equipment independently in minutes; and when not in use you will always be able to close your tailgate

The Expansion Ramp is available in both LoadAll's V2 and V3 Platform Style's:


V2 systems offer a fixed installation point behind the tailgate and maintains this position during loading, transportation, and storage. The benefits of this model are when loaded with a bike, ATV, or other gear users are able to close the tailgate (dependent on load length). The Cons: Platform length cannot be extended past tailgate and are only available for 8 Foot Long Beds


V3 systems are installed and mounted on engineered slide blocks to allow the system to be pulled out past the tailgate to extend the length of the pick-up bed 24", 27", 30", 33", or 36". This extension length can take a short bed truck and transform it into a long bed in seconds giving you a massive, skid-free platform to load up anything needed for your journeys. 



Product Specs:

  • 1,500 lb. Weight Capacity
  • For Short, Full or Long Bed Trucks
  • 7" Expansion Increase for loads up to 50" in width
    *Based on wheel-wheel/axle width
  • Available in V2 or V3 Style
  • Never rely's on or puts weight on tailgate
  • Tailgate able to close during storage or when Platform Extension is not in use
  • Sizes based on Truck Bed Length
    *System Size must be equal to or less than Truck bed Length
  • Limited 2 Year Warranty
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.